Looking for a conical spring mechanical seal? Then you have come to the right place at Qseals. Every type of seal is used in a different situation. On this page you can read more about conical spring mechanical seals, which are used for both clean water and chemical media. What are conical spring mechanical seals, and how do you order mechanical seals from Qseals?
What is a conical spring mechanical seal?
A conical spring mechanical seal is a mechanical seal that is also known as a conical spring seal or pusher seal. A conical spring seal is a single conical spring, unbalanced seal fitted with an O-ring as the secondary seal. This type of seal is easy to install and suits a wide range of applications. You can recognise our conical spring seals by the code QCS, which stands for Qseals Conical Spring Seal, followed by the type number.
A conical spring seal depends on the direction of rotation, so it is supplied with either a left-hand or a right-hand spring. When you use conical spring seals in a double seal arrangement, you need one left-hand and one right-hand conical spring seal. When do you use a left-hand or a right-hand spring? That is one of the topics we cover in our mechanical seal training courses. Would you like more information about our training courses? Contact us directly.
If the conical spring seal is not pressed into place by the impeller, a separate set collar is often used. A set collar is a stainless steel ring with set screws that lets you fix the rotating unit on the shaft at the required preload.
Conical spring mechanical seals from Qseals
Interested in a conical spring mechanical seal from Qseals? Contact us directly at [email protected], or browse all mechanical seals on the website. There you will find every type of mechanical seal, such as component seals, cartridge seals and engineered seals. Qseals offers a very wide range and has a suitable solution for every application. We also make custom products in our factory in Wezep, so there is always a seal or product that meets your needs.
